 |
 |
| Boxă pasivă pe două căi, rezistentă la apă |
The high power TT22 WP is a high performance, wide bandwidth system in a compact and efficient package.
Extended frequency response is provided by a new 12” low frequency neodymium driver and a new 3” diaphragm compression driver mounted on a rotatable 90° x 40° constant directivity horn.
The new high frequency driver utilises a titanium diaphragm with controlled break-up modes for improved sonic performance at high frequencies and the crossover design and the woofer cone profile have been optimised to match the directivity of the high frequencies horn and low frequencies section through the crossover region.
|
 |
TT22 WP includes the LICC-Low Impedance Compensated Crossover that features markedly lower induction values in series with the woofer. The benefit is delay reduction, reduced phase shift and superior transient response. For a superior power handling high power, aluminium case, resistors are used in the crossover network.
Connections to the amplifier are made through a watertight multi-pole connector. The cabinet is constructed of multi-ply baltic birch plywood and finished in a very resistant, textured, polyurea black paint.The grille is in custom perforated aluminum with open-cell fibers and water repellent woven fabric backing. |
| CARACTERISTICI |
| 90° x 60° CMD (Constant Matching Design). Unghi de acoperire largă, directivitate constantă |
| Crossover pasiv intern sau bi-amp extern |
| Driver de compresie cu neodimiu 1,5”, cu membrană de 3 ” (Active Mosfet Compression Driver Protection) |
| LICC (Low Impedance Compensated Crossover Network) |
| 6 puncte de suspensie |
| Flanşă de stativ 35mm |
| Watertight multi-pole connector IP67 |
|
|
|
| APLICAŢII |
| • Theatrical sound reinforcement |
| • Portable and installed audio-visual systems |
| • Concert halls, night clubs and houses of worship |
| • Stage monitoring side fill |
| • Front and balcony fill |
| • Outdoor sound reinforcement |
|
| SPECIFICAŢII ACUSTICE |
|
| Răspuns în frecvenţă -10 dB: |
50 Hz ÷ 20 kHz |
| Max SPL: |
136 dB |
| Unghi de acoperire: |
90° x 40° |
| System Sensitivity: |
98 dB 1W @ 1m |
| Rated maximum SPL: |
131 dB 1W @ 1m |
| System Nominal Impedance: |
8 Ω |
| System input power rating AES: |
800 waţi |
| System input power rating PEAK: |
3200 waţi |
| Recommended amplifier: |
1500 waţi |
| HF protections: |
Active Mosfet |
| Crossover frequencies: |
1.3 Hz |
| DRIVER |
|
| Compression Driver: |
1.5" Neo, 3" voice coil |
| Nominal Impedence: |
8 Ω |
| Input Power Rating: |
100 waţi AES |
| Sensitivity: |
111 dB 1W @ 1m |
| WOOFER |
|
| Woofer: |
12" Neo , 4" voice coil |
| Nominal Impedence: |
8 Ω |
| Input Power Rating: |
700 waţi AES |
| Sensitivity: |
98 dB. 1W @ 1m |
| INPUT SECTION |
|
| Input connector: |
Amphenol ECO / MAT |
| Output connector: |
Amphenol ECO / MAT |
| CABINET |
|
| Cabinet: |
Mesteacăn baltic |
| Hardware: |
6x fly tracks |
| Mânere: |
2 pe laterale |
| Flanşă stativ: |
Da |
| Culoare: |
Gri antracit |
| SPECIFICAŢII FIZICE |
|
| Înălţime: |
600 mm |
| Lăţime: |
400 mm |
| Grosime: |
400 mm |
| Greutate: |
24.2 kg |
|
 |
 |
|
|
|
In order to assist with the set up procedures for the TT+ Line Array Systems, RCF has developed a complete prediction software package.
 RAR, 3.88MB
|
|
|
|
|
Descărcaţi aici catalog Touring and Theatre în limba engleză.
 PDF, 6.44MB
|
|
|
|
|
Catalogul pentru TT+ Technology în limba engleză.
PDF, 96KB
|
|
|
|
|
Catalogul de accesorii pentru TT+ concert şi teatru în limba engleză.
PDF, 722KB
|
|
|
|
