 |
 |
The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology
|
 |
All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations.
The interface can be directly connected to the DSP on board of every TT+ line array module through the exclusive RDNet protocol making it possible to address in single cabinets or groups, specific presets or modification parameters in real-time. The key point of RDNet Control 8, in fact, is to ensure minimum refresh time (at least 5 per second) of all the system data performance, for example: RMS signals, compressor activity, temperature, fans speed, warnings, etc.
Data transfer can be routed also through the provided xlr connectors enabling the control of the system on traditional multi-cored cables. |
| CARACTERISTICI |
| Bridging the control and monitoring network in between Ethernet (remote control) / USB (direct control) and RDNet |
| Connecting PC to Control 8 and controlling up to 8 subnet of up to 32 slaves devices |
| Configuring the net with bus connection or ring connection |
| Auto sensing net configuration and registration |
| Controlling slave devices status and functions |
| Monitoring and displaying faults and warnings sent from slave devices |
| Storing subnet user filters configuration in a removable memory card |
|
|
|
| APLICAŢII |
| • Live events |
| • Touring sound |
| • TT+ Series line arrays and subwoofers configuration |
|
| NETWORK |
| EIA RS-485 standard connection |
| Daisy-chain ring architecture or bus connection |
| Up to 8 subnet managed |
| Up to 32 slave devices for subnet |
| RDNet CONNECTION |
| 8 Ethercon housed RJ45 with Ethernet Cat5 cable |
| 8 XLR chassis connectors with XLR data cable (alternative to RJ45) |
| PC CONNECTION |
| USB standard connection or Ethernet connection |
| Front panel USB type B female connector for direct control |
| Rear panel standard RJ45 connector for remote control |
| DATA STORAGE |
| 4 GB SD card reader |
| POWER CHARACTERISTICS |
| 100 to 240 VAC, 50 to 60 Hz (auto selection) |
| Less than 15 W of power consumption |
| Powercon connector |
| SPECIFICAŢII FIZICE |
|
| Înălţime: |
282 mm |
| Lăţime: |
44 mm |
| Grosime: |
182 mm |
| Greutate: |
2 kg |
|
 |
 |
|
|
|
In order to assist with the set up procedures for the TT+ Line Array Systems, RCF has developed a complete prediction software package.
 RAR, 3.88MB
|
|
|
|
|
Descărcaţi aici catalog Touring and Theatre în limba engleză.
 PDF, 9.56MB
|
|
|
|
|
Catalogul pentru TT+ Technology în limba engleză.
PDF, 96KB
|
|
|
|
|
Catalogul de accesorii pentru TT+ concert şi teatru în limba engleză.
PDF, 722KB
|
|
|
|
