Powered by
IPS 2700
2x 1100W RMS, amplificator profesional Class H
IPS Series is a range of two-way professional amplifiers that combines high quality performance and reliability with the latest power amplifications technologies.

This high value power-to-cost designs offer, in compact lightweight 2 rack unit space, the sound quality and the durability of traditional class AB and class H designs with the innovation of the latest power devices available.

IPS 2700 is a 2 channel power amplifier that delivers up to 2 x 1100 W RMS @ 4 Ω (2200 W RMS bridged @ 8 Ω), weighing just 14.5 kg.
It features independent gain dials, signal – clip and fault LEDs, stereo XLR input and Output link, 1.4 V to 0.775 V input sensitivity switch, mono – stereo – bridge switch, powercon outputs. Moreover, it is protected against shorts and open circuits.

Thanks to its high efficiency heat sinks and high speed DC fans, the IPS 2700 can withstand the hardest heat conditions ensuring great reliability.

2 unit 19" rack, easy transportation
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety.
Front panel signal / clip / protect LED indicators
XLR input connectors
SPEAKON NL4 output connectors
• Small and medium sized PA systems
• Club sound
• DJs
• Performance and sport venues
• Worship systems
• Public spaces
• Cinema
• 12135091
Power output stereo 4Ω: 1100 W RMS
Power output stereo 8Ω: 700 W RMS
Power output bridged 8Ω: 2200 W RMS
Frequency Response: 20 Hz ÷ 20 kHz (+0 –1 dB, 1 W)
Signal / noise rate: 100 dB
Crosstalk: -75 dB (1 kHz)
Damping factor: > 200 (8 Ω, 10 ÷ 400 Hz)
Slew rate: > 10 V / μs
Input connector: XLR
Input sensitivity: 1.4 V (/ 32 – 26 dB) dBm / V RMS
Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced)
Output connector: Speakon
Cooling: Forced
Amplifier class: AB
Protections: DC, internal fault, input overload, RF interference, unmatched load, output short-circuit, thermal drift, power supply over-current
Operating voltage: 220 ÷ 240 V (50 / 60 Hz) V ~ Hz
Power consumption: 700 W
Height: 88 mm
Width: 482 mm
Depth: 255 mm
Net Weight: 14.5 kg
Selectaţi o categorie:
Seria IPS şi QPS
IPS 700
IPS 1700
IPS 2700
IPS 3700
QPS 9600
Seria HPS şi DPS
HPS 1500
HPS 2500
DPS 3000
Catalog 2014
Descărcaţi aici catalog Professional Amplifiers în limba engleză.
PDF, 10.7MB
Click aici pentru descărcare.
Manual de utilizare
Manual de utilizare pentru Seria IPS în limba engleză şi italiană.
PDF, 1.7MB
Click aici pentru descărcare.
Prima pagină | Produse | Despre RCF | Tehnologii RCF | Parteneri | Imagini | Contact © 2006-2016 FBS Lines SRL. Toate drepturile rezervate.
Telefon: (+4) 0266-364.609
Mobil: (+4) 0745-605.993
E-mail: office[a]rcfaudio.ro
Ver. 2.03